Posted on Leave a comment

Nacho Ordinary Soap

Difficulty: Beginners
Time: 1 hr
Yields: 9 little soaps

img_0912

Desert, cactus, flamingo and mojitos seem to be everywhere at the moment. It’s been the theme in fashion, home decorations, and I even have nail wraps in this desert-theme. When I came across the little cactus and flamingo candles at Kmart, and found the matching cactus ice cube mold, I knew I wanted to make a soap to this theme! The only problem I had was finding the right name for it, so I held a little naming competition on Facebook for it and you guys had no problems coming up with some very creative and great names! It was really hard to choose just one. Here are some other of my favourites: Desert Dream, Don’t Desert Me Now, Desert Mojito, Prickly Clean. But the one that stood out from all the rest and I loved the most is “Nacho Ordinary Soap“! Thanks Kathryn Gage for coming up with this clever moniker!

img_0332

To make these you’ll need little cactus ice cube molds. I bought these from Kmart the other day for $2 each. As you can see, they also have some other cute molds, like the pineapple and unicorns!

The other material you need is clear and white melt and pour base, non bleeding yellow soap dye, green fruit mica and mint mojito fragrance, as well as a cube cavity soap mold. You can get all these from Pure Nature. I used the low sweat white melt and pour soap base and the crystal clear melt and pour soap base for this project.

img_0208

ONE: Cut the clear melt and pour soap base into small cubes and add them to a heat proof Pyrex jug. Heat on high in the microwave in 10 second bursts until the soap has melted.

You’ll have to eyeball the amounts. If you end up with a little left over, pour it into a separate container and you can use it for another project. The good thing about melt and pour soap bases is that you can re-melt it again.

img_0210

TWO: Add about 1/2 a teaspoon of green fruit mica and stir well until it has completely dispersed into the soap and there are no more clumps of mica on the surface. If you struggle mixing it in, spray a little alcohol on the surface and that will help with dispersing.

The reason we’re using clear melt and pour soap base here is so that the colour of the soap becomes a rich deep green. White melt and pour soap base will only give you pastel colours due to the white base colour!

img_0211

THREE: Once. you’ve mixed in the colour, pour the soap into the cavities of the cactus mold and spray them with alcohol to get rid of any bubbles on the surface.

img_0284

FOUR: While you’re waiting for the cacti to set, cut up the white soap base and melt it the same way in the microwave. Again, you’re going to have to eyeball the amount of soap you need.

img_0286

FIVE: Add a few drops of yellow soap dye. Make sure it is non-bleeding, because you don’t want it to bleed into clear soap. Start with a couple of drops first and keep adding 1-2 drops at a time until you’ve reached the colour you want. Remember, you can always add more colour but you can’t take it out again!

img_0290

SIX: Next, add your fragrance. The usage rate is about 1/2 to 1 teaspoon per cup of melted soap base. If you add too much, you will end up with fragrance on the surface of the soap after setting. If that does happen, you can just wipe it away with a paper towel. I had about 2 cups of soap base, so I added about 2 teaspoons. Stir well to mix it into the soap.

I didn’t add any fragrance to the cactus embeds and won’t be adding any fragrance to the clear layer of soap either, because the amounts of soap are only small and the yellow soap will easily mask it with its fragrance, so you won’t notice that they don’t actually have any scent!

SEVEN: Once you’ve added the colour and fragrance, pour the soap into the cube mold, filling each cavity to about 1 centimetre. Immediately spray with alcohol after pouring to remove any unsightly bubbles. Let the soap set before continuing.

For the next part, the yellow soap needs to have set so that when you pour the hot clear soap on top, it doesn’t break through the surface of the yellow soap. If you have left it to cool down completely, spray the surface with a little alcohol again, to make sure that the clear layer will adhere to it. Also remove the cactus embeds to have them ready.

EIGHT: Melt a little clear melt and pour base. I used the crystal clear melt and pour soap base for this to avoid any cloudiness in this layer. Also avoid adding fragrance, because that can make your soap cloudy as well.

NINE: Pour a small amount on top of the yellow soap, no more than half a centimetre, and immediately press a cactus into the middle of the soap and spray the whole surface with alcohol. Repeat for each soap.

img_0331

TEN: Let the soaps harden and cool down completely before removing them carefully from the mold. I left mine overnight before unmolding.

Make sure you wrap the soaps in cling foil to avoid condensation forming on the surface. Melt and pour soaps contain a lot of glycerin, which attracts moisture and hence, the ‘sweating’ effect on these kinds of soap.

As you can see in the picture, I made two different styles of soap. One has the embed sticking out and in the other, the clear layer covers the whole embed. I wasn’t sure which I would like better so I did both. But after setting, I decided I like the one where the cactus pops out more!

img_0633

Nacho ordinary soap

  • Difficulty: Beginners
  • Print

Ingredients

  • white melt and pour base
  • clear melt and pour soap base
  • yellow non-bleeding soap dye
  • green fruit mica
  • mint mojito fragrance from Candlescience
  • cactus ice cubes mold
  • square cavity mold
  • 99% isopropyl alcohol

Directions

PART 1

  1. Cut the clear melt and pour soap base into small cubes and place in a heat proof Pyrex jug.
  2. Heat the soap base in the microwave on high in 10 second bursts until melted.
  3. Add about 1/2 teaspoon of green mica and stir until dispersed.
  4. Pour the soap into the cavities of the cactus mold and spray with alcohol.
  5. Leave to cool down and set completely.

PART 2

  1. Cut the white melt and pour soap base into small cubes and place in a heat proof Pyrex jug.
  2. Heat the soap base in the microwave on high in 10-20 second bursts until melted.
  3. Add a few drops of yellow soap dye and stir. Add more dye, a couple of drops at a time until you’ve reached the desired colour.
  4. Add the mint mojito fragrance at 1/2 teaspoon per cup of melted soap, and stir well.
  5. Pour into the cavities of the cube mold to a height of about 1 centimetre.
  6. Spray with alcohol and let set.

PART 3

  1. Once the cactus have set, remove them from the mold.
  2. Cut a little clear melt and pour soap base into small cubes and place in a heat proof Pyrex jug.
  3. Heat the soap base in the microwave in 10 second bursts until melted.
  4. Pour a little of the clear soap base over the top of the yellow soap in the cube mold. You only want to pour to a maximum of half a centimetre.
  5. Spray the surface with alcohol and press a little cactus into the middle of the mold.
  6. Spray again with alcohol and leave the soaps to set completely before removing from the mold.

Remember to wrap the soaps in cling foil to avoid condensation forming on the surface.

Posted on 2 Comments

Aleppo Soap (Castile soap)

Difficulty: Advanced
Time: 2 hrs
Yields: approximately 1200 g soap

img_0854

Today is World Refugee day and I wanted to raise awareness to the soap makers from Aleppo, Syria. Here’s a BBC report on how the war has threatened the ancient tradition of soap making in Aleppo. And although the report is from 2013, there have been continued attacks on Aleppo.

So what’s so special about Aleppo? Well, Aleppo soap is one of the most ancient soap recipes in the world, and has been around for 2000 years or more. Soap makers in Aleppo still use the traditional methods making this soap, which is said to boast many skin care benefits and helps with skin problems such as dry skin, rashes, eczema, psoriasis, dermatitis and fungal infections. The reason for its skin healing properties is the inclusion of laurel berry oil, which is a powerful antibacterial, anti fungal, astringent and wound healer. Apart from laurel berry oil, Aleppo soap’s only other ingredients are olive oil and lye.

Check out the following video:

I tried to make a soap as true as possible to this ancient method, using a hot process technique and 22.5% of laurel berry oil, which is available from Pure Nature. You will need 250 ml for this recipe. The NaOH SAP value of laurel berry oil is 0.141.

Note Aleppo soaps are cured for over a year to achieve the best quality soap, however, you’ll be able to use these soaps after 4 weeks, if you can’t wait that long.


Before starting, please read the safety and precautions post, especially since this tutorial requires the handling of caustic soda!

If you have never soap before, I strongly recommend you check out the basic cold process soap tutorial first, and make several other easier soaps before continuing. Aleppo soap uses the hot process soap techniques and it is definitely an advantage if you know the basics of soap making.

img_0794

ONE: Measure out the caustic soda and the water in separate containers. Then add the caustic soda to the water  (never the other way round!) and stir until the caustic soda has completely dissolved. Set aside to cool down.

img_0803

TWO: Weigh out the olive oil and laurel berry oil directly to the crock pot or rice cooker. Turn it on and set it to the lowest setting. My rice cooker only has two settings: ‘warm’ or ‘boil’, so I used the ‘warm’ setting.

250 ml of laurel berry oil should give you 225 g of oil. Just keep shaking the bottle until you get the last few drops out!

img_0805

THREE: Once the lye has cooled down to room temperature, and making sure you are (still) wearing protective gear, carefully pour the lye solution to the oils, avoiding any splashes. The reason I cool down the lye is to avoid overheating and potentially have a volcano erupting in my soap (when the soap overheats and starts to expand and literally ‘erupt’ out of the mould).

FOUR:  Use your stick blender to mix until it has emulsified and thickened to a thin trace. Don’t you love the colour of the soap?

You’ll also notice the scent of the laurel berry oil has changed in the soap, kind of medicinal herby but also clean. I think the fragrance is absolutely divine!

img_0823

FIVE: After the soap has reached trace, stretch some cling foil over the pot to keep in the moisture, and place the lid on.

img_0822

SIX: Keep the soap at the lowest temperature for the next hour or so until the whole soap  has gelled, which you can recognise by the opaque appearance. Make sure you keep an eye on the soap during this time, as it can erupt. If you see the soap expanding, use a spoon or whisk to stir the soap down again. That usually helps.

img_0826

SEVEN: Once the soap has completely gelled, it is ready for pouring. Scoop or pour the soap into your soap mold and leave it to harden and set overnight. Don’t worry about covering or insulating the soap as it has already gelled, in other words, completed the saponification process.

img_0827

EIGHT: The following day, unmold the soap and cut it into bars or cubes. The bars of soap will need a further 4 weeks to cure before they are ready for use. However, true Aleppo soaps are cured for 6 months or even a year. So if you have patience, put them away somewhere and forget about them for a year. The longer you cure a soap, the harder and better quality bar of soap you will get.

img_0857


To support refugees in Syria, our family is participating in the Ration Challenge by Oxfam this week. This means that for one week we will eat the same kind of rations that the refugees receive in one of the refugee camps. We’re on day 4 and have 3 more days to go, and it’s been tough. The challenge has made us appreciate not only that we have sufficient food to eat (and waste!), but also the variety of foods that are available to us and the convenience of having kitchen appliances. I can’t imagine having to live off lentils, beans, chickpeas and rice every day. There’s only so much you can make with such limited ingredients.

If you would like to sponsor us: https://my.rationchallenge.org.nz/famziegler. Your donation will help provide food, medicine and education to the refugees in Syria.

Screen Shot 2018-06-20 at 12.50.59 PM

Aleppo Soap

  • Difficulty: advanced
  • Print
Before starting, make sure you wear protective goggles and gloves and work in a well-ventilated area, free from any distractions!

Ingredients

  • 775 g olive oil
  • 225 g laurel berry oil
  • 129 g caustic soda
  • 260 g water

Directions

  1. Measure out the caustic soda and the water. Then add the caustic soda to the water  (not the other way round!) and stir until the caustic soda has completely dissolved. Set aside to cool down.
  2. Weigh out the olive oil and laurel berry oil in your crock pot or rice cooker, and turn it on the lowest setting.
  3. Once the lye has cooled down to room temperature, pour the lye to the oils and, using a stick blender, mix until emulsified.
  4. Put the lid on (optional place a sheet of cling foil underneath first to keep the moisture in).
  5. Leave it to ‘cook’ until the mixture has completely ‘gelled’.
  6. Scoop into the mold and leave to harden overnight.
  7. The next day remove the soap and cut into bars or cubes. The soap bars will need to cure for a further 4 weeks until ready for use, but ideally for 6 months or more according to the original recipe.

Posted on Leave a comment

5X Sweet Orange Soap

Difficulty: Intermediate
Time: 1 hr
Yields: 1200 g soap or 10 bars of soap to fit a large loaf mold

img_0156

Citrus oils are very volatile and can lose their scent quickly in soaps, especially when they heat up during gelling in cold process. Using a concentrated orange essential oil removes some of these lower boiling components, mainly the terpenes, which intensifies the scent and makes it also longer lasting in soaps, but also removes some of the phytotoxicity. The higher the concentration the stronger the scent will be. Higher concentrated essential oils can also colour your soap, ranging from yellow to orange. Sometimes the colour can fade during curing, but the stronger tints tend to stay.

In this tutorial I am using the ‘5-fold’ orange essential oil from Pure Nature, which has an amazing intense fruity orange fragrance, and I can confirm that the scent is still strong after the obligatory 6 week curing time. This is definitely one of my favourite orange oils!

Before starting, please read the safety and precautions post, especially since this tutorial requires the handling of caustic soda!

If you have never made cold-process soap before, I strongly recommend you check out the basic cold process soap tutorial first.

img_9538

ONE: Measure out the caustic soda and the water in separate containers. Then add the caustic soda to the water  (never the other way round!) and stir until the caustic soda has completely dissolved. Set aside to cool down.

img_9548

TWO: Weigh out the coconut oil and shea butter, and heat in the microwave or stove top until the oil and butter have melted. This particular recipe will give you a nice solid bar of soap with a creamy lather due to the coconut and shea butter it contains.

img_9549

THREE: Add the olive oil and castor oil to the now liquid coconut oil and shea butter. I’m using pomace olive oil here because it makes for a harder bar than the cold pressed olive oil and doesn’t need as long a curing time. I also find that the pomace oil I’m using makes a whiter soap than my other olive oils, but I know that’s not the case with all pomace oils.

FOUR:  Add the ‘5-fold’ orange essential oil and give everything a good stir. As you can see on the bottle the Latin name is Citrus sinensis, which is the same as the normal sweet orange essential oil. The only difference being that is a 5-fold concentration than the normal essential oil.

img_9571

FIVE: Make sure you are (still) wearing protective gear, carefully pour the lye solution to the oils, avoiding any splashes.

img_9572

SIX: Use your stick blender and alternatively pulse and stir until the mixture has emulsified and thickened to a medium trace.

SEVEN: Pour the soap into your loaf mould and sprinkle some calendula petals over the top for decoration.

img_9586

EIGHT: Let the soap cure for a couple of days before unmoulding, and then let it harden for another few days before cutting it into bars. The bars of soap will need a further 6-8 weeks to cure before they are ready for use.

Note: the soap will have a yellow-golden colour to it in the beginning but this will fade over time, leaving only a light yellow tinge.

img_0148

5x Sweet Orange Soap

  • Difficulty: advanced
  • Print
Before starting, make sure you wear protective goggles and gloves and work in a well-ventilated area, free from any distractions!

Ingredients

  • 550 g olive oil
  • 300 g coconut oil
  • 100 g shea butter
  • 50 g castor oil
  • 138 g caustic soda
  • 260 g water
  • 50 ml 5x orange essential oil
  • optional: calendula petals

Directions

  1. Measure out the caustic soda and the water. Then add the caustic soda to the water  (not the other way round!) and stir until the caustic soda has completely dissolved. Set aside to cool down.
  2. Weigh out the coconut oil and shea butter and heat in the microwave or on the stove top until completely melted.
  3. Add the olive oil and castor oil.
  4. Measure out and add the essential oil and give everything a good stir.
  5. Once the lye has cooled down to room temperature, pour the lye to the oils and, using a stick blender, mix until emulsified and thickened to a medium trace.
  6. Pour the soap into the soap mould. Optional: sprinkle some calendula petals over the surface.
  7. Leave the soap to cure a couple of days before unmoulding, and then let it stand for another few days before cutting into bars. The soap bars will need to cure for a further 6-8 weeks until ready for use.

Posted on Leave a comment

Manuka soap

Difficulty: Advanced
Time: 1 hr
Yields: 1200 g soap or 10 bars of soap to fit a large loaf mold

img_0195

Manuka honey has been on an upward trend the past few years and not without reason. The medicinal properties of honey have been recorded since ancient times, and manuka honey has one of the highest anti-microbial activity, inhibiting growth of over 60 species of bacteria (Mandal & Mandal, 2011). It is used to assist in wound healing, in skin care, prevent and heal infections and stimulate growth of new skin cells. The importance of natural remedies, such as honey, has increased in importance “as resistant pathogens develop and spread, the effectiveness of the antibiotics is diminished”. The quoted paper ‘Honey: its medicinal property and antibacterial activity‘ is a good read and accessible to the public.

Honey soaps, especially soaps containing Manuka honey and essential oil, are particular effective cleansers in that they contain anti-microbial properties yet remain mild and gentle on the skin. However, honey soaps are tricky to make, because the additional sugar can cause the soap to overheat and burn. The higher temperature are difficult to work with, but if you follow a few tricks it is possible to create a beautiful bar of soap with all the benefits that honey will add to it.

TOP SOAPING TIPS WITH HONEY:

 

  1. soap at cool temperatures
  2. do not insulate your soap
  3. do not discount your water
  4. place the soap in the fridge for the first 2 hours after pouring

The Manuka soap that we are making uses Manuka honey, Manuka essential oils and beeswax from Manuka honey, to maximise the benefits of Manuka in the soap. I used the Manuka essential oil from Pure Nature, but alternatively you can use a tea tree oil for a cheaper alternative. The Manuka honey I bought from my local supermarket, and I didn’t go for the most expensive one! The Manuka beeswax I still had left over from a friend, and you can use any beeswax as a substitute, although I would recommend to go for an unbleached and undeodorised beeswax.

Before starting, please read the safety and precautions post, especially since this tutorial requires the handling of caustic soda!

If you have never made cold-process soap before, I strongly recommend you check out the basic cold process soap tutorial first.

img_9957

ONE: Prepare your lye as usual and leave to cool down to room temperature.

TWO: Weigh out the coconut oil and beeswax, and heat in the microwave or stove top until the oil and wax have melted.

img_9970

THREE: Add the olive oil, sunflower oil and castor oil to the now liquid coconut oil and beeswax, and give it a quick stir.

FOUR: MAKE SURE YOUR LYE HAS COOLED DOWN TO ROOM TEMPERATURE OR LOWER. Add two tablespoons of Manuka honey to the lye and stir, stir, stir until the honey has completely dissolved. This will take a while, but don’t be tempted to use warm lye because the honey will heat up the lye and you can end up burning the lye if the lye is still warm. Just be patient and keep stirring. You’ll notice the lye turning a reddish colour. That’s fine and how it should be. Let it cool down again.

img_9974

FIVE: Check the temperature of your oils. They should be no warmer than 32 degrees Celsius (90 degrees Fahrenheit). Add the Manuka essential oil to the oils and give the oils a good stir.

SIX: Add the lye to the oils, and use your whisk or stick blender to mix the lye/oil blend until it has emulsified to a medium trace. Pour the soap into the mould.

For the swirly surface, I used a chopstick in a looping figure 8 pattern along the length of the soap.

img_9992

SEVEN: PLACE THE SOAP IN THE FRIDGE FOR THE FIRST TWO HOURS! This is important. The sugars will heat up the soap during the chemical reaction, and placing it in a cold environment will both prevent the soap from heating up too much and will help keep the colour of the soap a nice cream colour rather than the usual caramel-brown colour of honey soaps.

After two hours (approximately), take the soap out and place it somewhere cool to cure. I put mine in the laundry, which is the coolest room in our house. Don’t insulate or cover your soap!

img_0001

EIGHT: Let the soap cure for a couple of days before unmoulding, and then let it harden for another few days before cutting it into bars. The bars of soap will need a further 6-8 weeks to cure before they are ready for use.

Note: honey is a humectant, meaning it will draw moisture to the product and honey soaps are prone to DOS (dreaded orange spot), which are harmless but don’t look pretty. Make sure to store the soaps in a dry area to prevent DOS and moisture forming on the soap.

img_0196

Manuka

  • Difficulty: advanced
  • Print
Before starting, make sure you wear protective goggles and gloves and work in a well-ventilated area, free from any distractions!

Ingredients

  • 400 g olive oil
  • 250 g coconut oil
  • 270 g sunflower oil
  • 30 g beeswax
  • 50 g castor oil
  • 135 g caustic soda
  • 270 g water
  • 2 tablespoons Manuka honey
  • 30 ml Manuka essential oil

Directions

  1. Measure out the caustic soda and the water. Then add the caustic soda to the water  (not the other way round!) and stir until the caustic soda has completely dissolved. Set aside to cool down.
  2. Weigh out the coconut oil and beeswax and heat in the microwave or on the stove top until completely melted.
  3. Add the olive oil, sunflower oil and castor oil and give it a quick stir.
  4. Once the lye has cooled down to room temperature, add 2 tablespoons of Manuka honey and stir until dissolved.
  5. Check the temperature of the oils. They should be no warmer than 32 C (90 F).
  6. Add the Manuka essential oil to the oils and give everything a good stir.
  7. Carefully pour the lye to the oils and, using a stick blender, mix until emulsified to a medium trace.
  8. Pour the soap into the soap mould and place it in the fridge for 2 hours.
  9. Remove from fridge, and place it in a cool spot to cure.
  10. Leave the soap to cure a couple of days before unmoulding, and then let it stand for another few days before cutting into bars. The soap bars will need to cure for a further 6-8 weeks until ready for use.

Posted on 2 Comments

Beauty (shower) bar

Difficulty: Intermediate
Time: 1 hr
Yields: 1200 g soap or 10 bars of soap to fit a large loaf mold

img_8185

As I often explain in my classes, don’t put in expensive oils in your soaps, because soap is a cleansing product, which is to be rinsed off and you’d be literally flushing your money down the drain! Think of it, a bar of soap will last how many showers? Fifty? Hundred? And each time you only use the tiniest sliver of your bar of soap, which after lathering your skin, you will rinse off again, because you don’t want any soap left on your skin. Soap is not a leave-on product, it’s a rinse-off product. So keep all the expensive oils and ingredients for your moisturisers and balms, and for your soaps, concentrate on cleansing properties, which not only includes lathering qualities and hardness of a bar of soap, but also mildness, exfoliation, antiseptic, circulation boosting or astringent properties, just to mention a few.

However, that doesn’t mean you can’t make a good soap! The special blend of essential oils I created for this Beauty (shower) Bar are known for their skin-loving properties and yet are still affordable. The soap also contains 70% olive oil, which is known to make good quality, long lasting bars of gentle cleaning bars of soap. However, a soap made of pure olive oil has a very long curing time and doesn’t really lather well, so I’ve added coconut oil to give it hardness and a nice fluffy lather. The benefit of adding shea butter to the soap is that it contains emollient and moisturising polyphenols that can’t be converted into soap, making it a great additive to soap. Cocoa butter shares similar skin-loving properties as shea butter, adding conditioning and nourishing qualities to the soap. And for mildness, I’ve increased the superfat of this soap to 8%. The only problem with this is that it also increases the risk of DOS (dreaded orange spots), so make sure you follow the instructions carefully and store your soap correctly (dry place, away from humidity!).

Before starting, please read the safety and precautions post, especially since this tutorial requires the handling of caustic soda!

If you have never made cold-process soap before, I strongly recommend you check out the basic cold process soap tutorial first.

img_5184

PREPARATION: Measure out the following essential oil blend:

  • 15 ml rose geranium essential oil
  • 12 ml lemongrass essential oil
  • 5 ml bergamot essential oil
  • 5 ml sweet orange essential oil
  • 3 ml spearmint essential oil

Rose geranium is an all-round skin oil, which, in my opinion, doesn’t get the attention it deserves. Applied to the skin, it helps balance the sebum production of the skin, making it beneficial to both dry and oily skins, and its antiseptic, anti-inflammatory and cell regenerative properties have proven it valuable for a range of skin problems. I’ve added lemongrass because I love the fresh, lemon-y scent of lemongrass, but also for its tonic and astringent properties, which leaves your skin radiant and glowing. Both lemongrass and bergamot act as deodorisers, and, in addition, bergamot supports the sebum balancing property of rose geranium. Sweet orange is a great essential oil against stress, and not just mental stress. It helps combat stressed skin, boosts circulation, yet also calms the skin at the same time. And lastly spearmint, similar to peppermint, is a wonderful for sensitive and irritated skins. If you don’t have spearmint, you can easily substitute for peppermint, although personally I prefer the fragrance of spearmint in this blend. If you are looking for essential oils, Pure Nature has high quality essential oils at reasonable prices.

img_5646-1

ONE: Prepare your lye as usual and leave to cool down to room temperature. Because this soap contains 70% olive oil, I added 2 teaspoons of sodium lactate, which is a natural additive, to my lye solution to make the soap harder and reduce curing time.

TWO: Weigh out the coconut oil, shea butter, and cocoa butter, and heat in the microwave until the oils have melted.

img_5187

THREE: Add the olive oil to the now liquid coconut oil and butters, and give it a good stir.

img_5189

FOUR: Once your lye solution has cooled down to room temperature, add the lye to the oils. If your oils are still very warm, let it cool down a little. It’s ok if it’s a little warmer than usual, but it shouldn’t be more than 30-32 degrees Celsius.

Use your stick blender to mix the lye/oil blend until it has emulsified.

img_5194

FIVE: Add the essential oil blend and keep mixing with the stick blender until the soap has thickened to a medium trace. Pour the soap into the mould.

Use a spoon to add texture to the top of your soap and sprinkle a few rose petals over the surface.

SIX: Let the soap cure for a couple of days before unmoulding, and then let it harden for another few days before cutting it into bars. The bars of soap will need a further 6-8 weeks to cure before they are ready for use.

Because of the high superfat content of the soap and the addition of essential oils, this soap is more at risk of DOS (dreaded orange spot) than usual. To avoid these pesky DOS, make sure you cure and store the soap in a dry place with good air circulation, away from humidity.

img_5293

Beauty (shower) bar

  • Difficulty: intermediate
  • Print
Before starting, make sure you wear protective goggles and gloves and work in a well-ventilated area, free from any distractions!

Ingredients

  • 700 g olive oil
  • 200 g coconut oil
  • 50 g cocoa butter
  • 50 g shea butter
  • 132 g caustic soda
  • 260 g water
  • 2 teaspoons of sodium lactate
  • 15 ml rose geranium essential oil
  • 12 ml lemongrass essential oil
  • 5 ml bergamot essential oil
  • 5 ml sweet orange essential oil
  • 3 ml spearmint essential oil

Directions

  1. Prepare the essential oil blend and set aside.
  2. Measure out the caustic soda and the water. Then add the caustic soda to the water  (not the other way round!) and stir until the caustic soda has completely dissolved.
  3. Add 2 teaspoons of sodium lactate to the lye solution and set aside to cool down.
  4. Weigh out the coconut oil and butters and melt in the microwave or on the stove top until completely melted. Add the olive oil and give the oils a quick stir.
  5. Once the lye has cooled down to room temperature, and making sure you are still wearing protective gear, carefully pour the lye to the oils and, using a stick blender, mix until emulsified.
  6. Add the essential oils and keep mixing with the stick blender until medium trace.
  7. Pour the soap into the soap mould and sprinkle some rose petals over the top.
  8. Leave the soap to cure a couple of days before unmoulding, and then let it stand for another few days before cutting into bars. The soap bars will need to cure for a further 6-8 weeks until ready for use.